All of our Bathroom installation projects in London has been completed by experienced and knowledgeable tradesman. Every project is assessed and completed in the way, so it meets or goes beyond our client expectations.
When it comes to a bathroom fitting, the installation process is one of the most complicated as we are dealing with the high amount of water which is used in the room on the daily bases. So we need to make sure that the house structure is protected and waterproofed with high attention to detail in order to protect it from a damage caused by leak which leads to a major structural damage. This is why every our installer are qualified waterproofing expert.
We also understand that a bathroom is not just about waterproofing, pipes and structure it got way more to it than that. This is why we constantly educate our selfs in order to achieve and provide the flexibility of the bathroom design no mater if it is a master bathroom with walk in shower or half bathroom with the vanity unit and the toilet. We are creative and knowledgeable, we can create bespoke bathroom furniture, we can make custom made showers and many more.
Bathroom installation is a perfection which every detail requires a sleek finish, from the correctly build structure to the professionally waterproofed wet-room, from the flawlessly fitted tiles to a perfectly mitred trims and to perfectly finished dream bathroom which last and brings a joy to every home owner and guest.
We have no limits, we can fit any bathroom of your dream!
Not every home has a master bathroom, but if it does, it usually contains a shower, toilet, basin and a bathtub.
Usually every home has at least one full bathroom which contains a shower or a bathtub, basin and a toilet.
Half-bathroom is typically called a guest room, a powder room or a cloak room. This type of rooms usually contains a toilet and a basin.
Custom shower is built from scratch according to the required design and can be installed in any place of the room.
Corner shower can be with enclosure or with side screen and the tray can be walk-in or raised. We also make it custom made if required.
Very common type which can be used as a shower or as a bathtub because it has all the equipment for both types.
We can source and install any type of the shower system you like: integrated, exposed, digital or even power shower. However the integrated and exposed shower systems are the most popular.
Integrated shower systems has an integrated thermostatic valve which can be installed with 1-4 outlets.
Shower towers typically has a thermostatic shower bar mixer or similar and 1-2 exposed shower outlets.
There are so many bathtub options you could could pick from: free standing, ended panel, L shape, recessed, corner and many more. However the free standing, recessed and corner bathtubs are the most popular.
Free stand bathtub is most common for the master bathroom installation and it's require more space.
Alcove or recessed bathtubs are most common for a full bathroom installation, typically as a bathtub/shower combo.
Corner bathtubs usually fitted in the smaller size bathrooms where a standard size bathtub does not fit.
Back to wall toilets are floor mounted and pushed all the way to the wall. Also it has a concealed toilet cistern which is integrated.
Wall mounted toiled is hang on the wall and it also has a concealed toilet cistern which is also integrated.
Floor mounted standard toilet which has a cistern mounted directly on the toilet.
Single basin vanity unit can be installed either wall mounted or floor mounted.
Double basin vanity units can be fitted wall mounted or floor mounted.
Only basin can be fitted either alone or with pedestal.
There are a lot of waterproofing brands in the market, but we tend to use only the best ones which are tested by us and our clients over time. Also, the brands we use: Schluter systems, Mapei and Wedi are well known, trusted and tested over time all around the world including United Kingdom
It protects every surface of the bathroom structure from mould and leak damage as it works as a barrier that does not allow the water to penetrate trough in to the main structure of a house.
By using a waterproofing products such as walk in shower trays, boards and waterproofing membrane we can create a custom made bathroom furniture, any shape shower in any location and many more.
Fully tanked bathroom provides professional finish and long lasting bathroom which gives a strong selling point when it comes to the house selling.
We carry out in depth site assessment in order to provide the most accurate and cost effective quote in order to achieve the best possible results completely free of charge.
We always plan around our client when it comes to visit for a quote, we listen and we try to understand every single aspect of the design or the request. We run extra mile and create a bathroom design visualisation if required.
We source the materials from the beginning to the end and we take care of the waste disposal by our self as we have waste carriers license.
Further more, we not just taking the responsibility for our provided services, but we are also have business liability insurance up to £5 000 000.
Leave everything to us and we will deliver!
Please reach us at info@cozyinterior.co.uk if you cannot find an answer to your question.
Bathroom installation project cost depends from many aspects, for example:
We install the bathroom following the best practice in the industry, strictly following the manufacturers instructions to ensure it's durability longevity and quality. We not just install the products, we also create and build custom made showers and furniture like: benches, partition walls, vanity units and many more.
This is entirely personal preference as the product price range vary massively. In terms of the waterproofing, company like 'Schluter Systems' are one of the top leading companies in the waterproofing industry, same as some of the plumbing accessory brans like: 'Grohe' or 'Geberit'.
Some of our clients want to participate and be part of the project and we are completely fine with that. We always ask if the customer would like us to source and deliver the products or customer want to supply it by them selves. However when it comes to fundamental materials like: structural wood, adhesives, sheet material and plumbing fittings we source and supply it by our selves, as we know what is the best suitable for the job in terms of price, quality and purpose.
Most of the times there is no problem fitting a wet-room in the flat, however sometimes it's not possible to fit a walking shower which is barrier free, due to a building waste installation system which is installed over the floor. In this case we recommend to install a raised shower tray which can be a standard tray or tiled.
Wet-room is not problematic at all, as long as it's installed by professional, correctly and strictly following manufacturer requirements. The installation complexity depends from the bathroom design, but everything is achievable by experience professional fitter.
104 Westgate Apartments, 14 Western Gateway, London E16 1BN
Phone number - 070831700353 Email address - info@cozyinterior.co.uk
Our working hours are from Monday to Saturday from 8 am to 6 pm. Please contact us to arrange a visit.
This website uses cookies. By continuing to use this site, you accept our use of cookies.